Converted chaos Lord of Nurgle

[Scumdog47]

Care to elaborate on the process of creation of this one?

[Apocalypsedreamer]

okeydokey.

1. The top half of the model was made by glueing a terminator combi weapon arm and a power fist arm to a slightly smaller than termie but larger than power armour body(including shoulder pads).

2. The head I had sculpted a long time ago but mostly included sticking a marine head in a blob of green stiff and mangling the green stuff.

3.The wing at the back ids from the chaos sawn kit and was attached by means of a greystuff hump nd a piece of guitar wire.  On the other side the pipes were made out of plastic tubing cut to differing lengths and glued/grey-stuffed on.

4. The tail/lower body is in 3 parts; the upper, the join and the lower.  The upper was made by putting greystuff around half a glow stick join and smoothed down I then place guitar in it to look awesome. The lower was made by rolling out a sausage shape in greystuff and putting it in a shape I was pleased with then cutting grooves and patterns into it. The join was made as you can imagine with greystuff and just fills in the holes and joins it up.

5.Voilla


Hope that helped


A.D

[Scumdog47]

Cool!
Thanks for the description.

[messyart]

Well, it's certainly, as you may well have noticed, how I do *my* nurgleys. But it's good.
Looks a bit more Slaaneshi, though ;)